About the product
Bathroom mirror heated with bathroom mirror cabinets represent the most up to date standard of technology, giving a high standard of temperature stability and resistant to moisture, vibration, shock, dust and ageing.
Simple Step Guide for Installing a bathroom mirror heated with bathroom mirror cabinets
Mark out the back of the mirror to indicate where the mirror heated pad is to be fitted
1. Peel off the protective paper exposing the 'sticky' side of the mirror fogless
2. Position one edge of the mirror heating pad in the desired position on the keeping the other edge away from the mirror
3. Gradually lower the pad onto the mirror applying even pressure to ensure there are no air bubbles or creases
4. If the mirror is not framed & is being fitted directly onto the wall, a small recess will need to be made in the wall to compensate for this & allow the mirror to sit flush.
Electrical Connections
All wiring must conform to the latest IEE wiring regulations
It is recommended that the NRG bathroom mirror heated is connected via the lighting circuit or on a separate switch.
1. The circuit should be protected by a 5amp fuse or circuit breaker
2. The wires are coloured as follows: BLUE - Neutral, and BROWN - Live/positive
3. The mirror steam free must not be accessible once installed
4. Any metal part surrounding the mirror must be earthed & comply with current wiring regulations
5. Multiple pads may be fitted to a single mirror & should be connected in parallel - pads must not overlap
The NRG bathroom mirror heated with bathroom mirror cabinets must not be cut or pierced as this may damage the insulation making it unsafe.
Price
By your order
Contact with supplier